Like the rest of Daystar’s extensive Polyurethane kits, Daystar Spring and Shackle Bushings are an excellent upgrade over stock rubber bushings. They allow less deflection while cornering and can help restore steering feel when used in the front of a vehicle. Like the rest of Daystar’s Polyurethane products, these bushings are resistant to vehicle fluids and road grime. They also use a unique Polyurethane blend that ensures long life and consistent performance. Daystar’s 30 years of experience has resulted in the widest selection of replacement bushings that you’re going to find. Whether it’s a vehicle restoration or an upgrade over rubber, Daystar spring and shackle bushings make a difference you can feel.
- Reduces body roll and shift
- Reduces stress on steering components
- Improves handling characteristics
- Vehicle fluid and road grime resistant








Zakk –
Imagine my frustration when i have both axles out from underneath my daily driver and then realize i needed to sets of bushings per axle. Seems like a quality product but it would be nice if they had different options for aftermarket springs or at least a disclaimer that you may need to purchase multiple sets. The issue I’m having is that i need 8 of the larger outside diameter bushings per axle and do not need any of the smaller outside diameter bushings except for the 4 that go in the upper shackle mounts.
Working man –
Fit well, after removing old bushings and sleeves which was in the instructions. My only complaint would be the lack of grease with the kit. I like more grease darn it! Research tells me the grease they supply, and recommend is silicone with PTFE. I used brake grease to compensate for the rest of the suspension. Brake grease is a moly graph with PTFE. Great product though, made in USA!
Buildit –
I purchased stock replacement leaf springs for our 1987 Wrangler and these fit perfectly. The surface that rides against the shackle is flat compared to the stock rubber bushings convex shape.
Matt –
90 yj with lift. Kit came with 2 large bushings and 4 small bushing but my springs need the large bushings in both ends and only needed the small bushing for the frame. so it took both kits I bought to do just the front and now have extra small bushings that I cannot use. Bushings look to be good quality just not enough to do even the front with 1 kit.
Ron johnson –
Rubber bushing fit just right 95 yj
☆ Dr@g¤Nf|¥0743 ☆ –
I had to use a bench grinder on the rear springs front bushings. These are WAAAAAY to big, BUT…. THEY WORK!!!
Heyoka78 –
Nice product, arrived on time. Wrong quantities to complete a rear spring bushing changeout. Should be 4 sets of large (for the spring eyes) and 2 sets of small (for the shackles)It’s the opposite and now I dont have what I need to complete the job.
Glen E Witherel –
Worked perfectly, does what was expected.