Best reviews of ???? Daystar, Universal Rocker Switch With Blue Light, 20 Amp, Single Pole, KU80011, Made In America, Yellow ????

8 reviews for Best reviews of ???? Daystar, Universal Rocker Switch With Blue Light, 20 Amp, Single Pole, KU80011, Made In America, Yellow ????

1. 

   Rated 4 out of 5

   DRF – December 7, 2013

   Really like these. I put it on my Massey GC2610 tractor for the 36 watt 7″ LED light bar mounted on my ROPS. The 20 amp rating gets me away from adding a relay. Since this isn’t going in a Daystar panel I had to cut a hole myself. Couldn’t find any spec for hole size, so I contacted Daystarnet.com Saturday at after 2pm. I got a reply and the info within 2 hours!!! That is great response time on a weekday, simply fantastic for Saturday. Would be 5 stars, but hole spec printed on bubble card would be so easy… Oh, in case you need it, hole size is .41×1.71 inches. Thanks Don Mc at Daystar. Blue is light and bright. Makes it good for daylight view in bright sun. I would buy again. If it fails early, I will update my review. As of now, I am overjoyed with this switch. Gonna do the same lighting for sons tractor, so I got 2 of these switches.

2. 

   Rated 5 out of 5

   Jamie – March 29, 2014

   The Rugged Ridge side A-pillar switch pod will work with this switch. Rugged Ridge makes similar switches but I like the shape of these better. The directions that come with the switch are clear and so they are easy to connect. The power for the lamp light comes from the wire going to the relay. There is also one terminal on the back that needs to go to a ground connection. So there are three terminals on the back; Power In, Power Out, Lamp ground. The terminals are standard size and easy to connect terminals to. You will have to get your own terminals and wire; there is no wiring harness for the switches.The plastic for these switches seems a little light weight but other reviewers have indicated no long-term problems.

3. 

   Rated 4 out of 5

   Average Jane – July 30, 2015

   I have a 2013 Kia Forte EX and I wanted to add a switch for an accessory. Unfortunately the Kia Forte doesn’t come with any extra switch panel spots except for where stock applications should go – meaning you can’t just simply pop them out and cut a hole because they were made for specific uses.I took a chance ordering this, based on the provided measurements I had a feeling it would be slightly too small. I was correct, it doesn’t click into place, but it does fit snug. I may add a drop of glue, but for the most part I think it’s going to stay put, especially once I have the wires on it.If you have a 2013 Kia Forte also know that this will ONLY fit in the middle spot of your switch panel. It will not fit in the left or right slot without doing modifications to the switch and/or panel.

4. 

   Rated 4 out of 5

   Product Reviews International – November 14, 2015

   I bought this to replace the switch in my truck for my off-road lights. Its rugged, well built, and solid all around. Its easy to use and has a nice blue light, making it easy to find in the dark when on. wiring it up was straight forward and very easy.Something I also noticed, next time you’re at Wal Mart, look at the electric carts. They use this exact same switch for one and off. Those for sure get a TON of use, so that should give you an idea right there of how well made this switch is.

5. 

   Rated 4 out of 5

   D. Francey – August 24, 2016

   Middle pin is power in. Pin next to it is power out. Pin off away from the others is ground for the LED.I have two of these. One is defective and shorts between the ground pin and power pins when turned on… sparks fly.. not good. For my defective one I just dont use the built in light. Interestingly, for both switches when using a continuity checker will say all 3 pins are connected to each other when the switch it powered on.. I guess there is enough resistance though that it doesn’t short on my working one… still kinda sketchy and not something I had seen before . I had one as a switch for a light bar I added to my snow blower. The other on my lawn tractor for a light bar.

6. 

   Rated 5 out of 5

   Aaron – January 4, 2017

   These switches are great, for the most part. They click positively which I love. They fit absolutely perfectly in the Auxiliary panel in my ’94 Jeep YJ. The suckish part is, they’re kind of greenish, not blue, and they aren’t wired exactly the same. (I got two of them) one is wired “power in-power out-ground” and the other is wired backwards. I got these switches for two separate wiring harnesses. The one for my light bar, the switch stays on all the time which I don’t particularly care for. And the other doesn’t. The light only comes on when activated which I like. I don’t like having two different ones. It could be that the wiring harnesses are slightly different but either way, I kinda wish they were blue like I thought they would be and also I wish they were wired the same.

7. 

   Rated 4 out of 5

   heather – November 25, 2018

   These rockers rock. They work good, look good and the wiring is clear and easy. My only issue is that everywhere I looked, including here, and several Jeep sites, says that these are a direct fit for my 2004 Jeep Wrangler. I was able to get them in with a little effort and some fear that I was going to break something. As you can see in the photos, they aren’t quite flush at the bottom. It was a bit of a struggle to get them in the existing holes without modifying the opening in my dash panel. I am perfectly satisfied with the fit for my purposes, but if this was a paying job, or an install for someone else, I would have to break out the dremel tool and modify the panel (on the back). Fair warning. They work great.

8. 

   Rated 5 out of 5

   Amazon Customer – June 4, 2022

   It’s perfect for making additions to the dashboard of the truck I have a classic jeep from 1998 and it’s perfect for that