With a 180 degree farenheit preset turn-on, 165 degree farenheit turn-off, this -8AN x -8AN fluid control thermostat engages the fan on any remote cooler electric fan so that it comes on only when needed. Brass hose barb fittings included in kit. Maximum 15 amp capacity.
- 180 degree farenheit preset turn-on temperature
- Turn-off temperature is preset at 165 degree farenheit
- -8AN Inlets
- Brass hose 1/2 inch barb fittings included











Welder mom –
temp switch is a little small to be connected strait to a fan but if used with a relay will be fine
Blueblur1984 –
I wired this to a relay in order to have it flip the switch at the designated temperature. The whole assembly works like a charm and despite 4wheeling, driving at highway speeds and regular day to day use I have never exceeded 195 degrees (appearantly trans fluid starts to degrade at 200).
james –
Don’t have brass fitting with it like the pictures, but aluminum fitting and thin as paper, very fragile. James
Mr. Willaim A. Fraenza –
These work great but be very very Careful Screwing in the censer do it by hand with a drop of locktight
j –
Information in the details states, “brass hose 1/2 inch barb fittings included” however, they are aluminum and please note most transmission lines are 3/8″. I couldn’t find aluminum barb fittings locally, so I tossed this in the bin and made my own.
Anita McCready –
The small diameter of the shaft on the thermostat is a weak point. Finger tighten only, use liquid thread sealer, maybe you’ll have a chance of it not leaking or breaking. Derale should make it maybe 1/4 would be stronger.
irishwhiski –
Nice little product, nice and light. Installing soon to see how well it will hold up…
Q Reynolds –
The thermostat switch is stuck closed brand new. Send power to my fans regardless of temperature. Yes its wired correctly. Also the fitting it threads into can’t be clocked. The hole goes all the way through for the switch so if it needed changed you would lose fluids. Just go with the American volt switch and the fitting with the 1/8″ hole.