- Color: Black
- Material: Aluminum
- Brand: MOMO
- Item Diameter: 350 Millimeters
- Grip Size: 350 millimeters
- Number of Spokes: 3
- Vehicle Service Type: Passenger Car
- Classic-look wheel in top grain leather
- 350 mm (13.8 in) diameter, measured outside to outside
- 30×30 mm rim diameter
- Black spokes




T. Doan –
I just installed the Momo Prototipo yesterday and I have not had a chance to drive the car yet so I cannot give any “driving” impressions. However, here are some thoughts about the quality of the wheel and the difficulty/ease of installation.I love the aesthetic qualities of this wheel. The design is a simple tri-spoke. The wheel is flat so there is no dish. The horn button is small and simple but ultimately serves its function. The “Prototipo” engraving is appropriate and not overwhelming. The leather is expertly wrapped around the wheel. You can see the seams on the back side of the wheel where the leather is glued but the glue job is smooth and clean. You can tell it is hand-sewn because the stitches are not perfectly straight. That might bother some but for me it’s just fine. Finally, the combination of Momo steering wheel and steering hub are noticeably lighter than my stock steering wheel.The installation was extremely simple since I do not have an airbag in my 1987 BMW e28 535is. The install took about 10 – 15 minutes. I just cranked my wheels straight ahead. I marked the forward position on the steering spindle with a pen and then I lined up the steering hub which has a position marker labeled “Top”. Then it was just 6 allen bolts to lock the wheel to the hub 7 nm (torque spec), followed by tightening the steering column spindle nut to secure the steering hub to the steering column spindle. Finally, I connected a single black wire from the steering hub to the back of the horn and there is a brass spring that contacts the hub to serve as the ground. Presto and done!
Kyle –
The steering wheel itself is amazing its super comfortable and the price is perfectly fine. The one issue I had was that it did not come with the center cap/horn button and horn plate. So I was forced to reuse the previous owners rose gold plate and it looks terrible in my car. If you guys could send me the horn plate and button this would easily be 100% 5 stars
Don –
Installed the Momo Prototipo along with an NRG short hub and quick release in my 2006 Jeep TJ and I couldn’t be happier. The overall quality of the steering wheel is very high and the fit and finish of the materials are great. The wheel is smaller and much lighter than the stock one I replaced.I’m glad I went with Momo and not some cheap knock off.Definitely worth my money.
Bob G –
Excellence was expected, and excellence was delivered.Thank you very much.
nicolas –
Me llego incompleto el pedido, no llegaron los tornillos, el cable y el aro de ajuste del timon
Amazon Customer –
Nice wheel but for the price the leather feels cheap
Nash L. –
Love this wheel. Amazing looking and quality is exceptional.
S. Fenton –
This is a to my eyes a genuine Momo wheel. If you look at the instructions in the box you will see that the allen screws, hub and horn ring must be purchased separately as per the norm for Momo. A horn button is included however.